Products
- HOME
- Industrial processing equipment
- Punching
- Linear type Multi Punching Machine
Punching
Industrial processing equipmentトップLinear type Multi Punching Machine
MP-12□□□L series
- Ceramic green sheet,etc.and work like sheet.
- MP-12150L / MP-12200L
- Super-high speed MP
Super-high speed X and Y axes are installed. - Max. 1500 hole/min (with PUM-25L)
Low vibration / Quiet machine
Characteristics
- A minute hole is processed in super-high speed and super-high accuracy.
- The initial running cost is decreased by die-less and generalizing punches.
- ・The setting of the unit of a variegated punch and the punching method can be easily done according to the processing pattern and the condition.
・Selectable from abundant punch units, suitable for processing conditions of air and electric type, and from the punch types in a super-minute diameter, a standard hole, gang, and grid, etc. - Selectable from line-ups corresponding prototype, many varieties small lot, and medium mass production
- Selectable from the combination of a main body modules and various loaders
Standard Specifications
| Model | MP-12150L | MP-12200L | |
|---|---|---|---|
| Work | Material | Ceramic green sheet,etc.and work like sheet. | |
| Thickness | Max 0.5 mm | ||
| Size/Sheet | Max □175mm(RC:Max □180mm) | Max □225mm(RC:Max □250mm) | |
| Punching area | Max □150mm | Max □200mm | |
| How to attach | Supply : Sheet : Standard work holder, Vacuum frame Roll : Vacuum frame |
||
| Punch unit(OP.) | Number of installing (in the PU-25 size) | 12axes | |
| Capability | Machining Accuracy | ±10μm(Between 2 points in 1" punched on standard UHT's test film) | |
| Machining Speed | By PUM-25L :Max1500hole/min By PU-25L :Max1000hole/min By PU-25A :Max 600hole/min NC punch with 1mm pitch in Y direction on standard V/H work holder |
||
| System | Drive method | XYaxis linear motor | |
| Control function | Control | UHT made MJUC controller | |
| Operation | 6.5" color LCD touch panel | ||
| Punch data | Software on PC (independent of the main body) | ||
| Number of processing data memories | 1 file : Max. 30000 positions | ||
| Network | Transmission of machining data from PC to the machine through LAN. Centralized monitoring the machine operating condition (up to 4 units) on PC |
||
| Image Processing method | Image data processing is executed by the image processing function with CCD only made of UHT. | ||
| Power source | 3φ AC200V ±10% 3kVA | ||
| Air source | 0.4～0.7MPa | ||
| Machine size (Body) | W | 1170mm | 1220mm |
| D | 1070mm | 1200mm | |
| H | 1400mm | 1400mm | |
| Machine weight (Body) | 約1000kg | 約1250kg | |
| Working condition | Temperature | 10℃～35℃ (22℃±2℃ recommended) | |
| Humidity | 40～60％ (Non-dewing) | ||
Options
- Punch setter
- Data conversion software from CAD
- Booster tank
- Metal mold (Punch, Die)
- PC
- Punch units
- Power box
- Punch break detecting software
Example of floor layout
Outline Drawing
Industrial processing equipment Product lineup
Support
Contact Us
- Inquiries about products
Request catalog here 
- Reception time：9:00～18:00(Weekday)